Description

Bilstein 2-3″ Lift Kit – Gen 3 Mazda BT-50 3.0Ltr Dual Cab 

The kit contains:

• 2x  Bilstein B6 Offroad Performance Front Shock Absorbers for 50-75mm of lift 
• 2x King Springs Front Springs
• 2x Bilstein B6 Offroad Performance Rear Shock Absorbers for  
• 2x Raised EFS Leaf Springs 50MM 
• 4x U Bolts
• 1x Polyurethane Bush Kit 

Note:

• During placing the order when selecting Spring Rate for front and rear Please select only Current Constant Load.
• Occasional Loads and Towing is not considering as constant load.
• By Selecting unrequired and too Heavy coil/Leaf spring rate result will be rough ride and may stretch/damage other suspension component.

WARNING – 75MM (3”) OR HIGHER LIFT KITS 
3″ lift kit is  for off-road use only.
• Refer to Local Laws before Fitting to Registered/Road Vehicles
• An Engineering Certificate may be required
• Handling Characteristics will Diminish on Lifts Above 50mm (2”)
The following modifications (but not limited to) need to be made to the vehicle before
the kit is fitted.
• Adjustable Panhard Rods
• Modified Leading / Trailing Arms
• Brake Hoses
• Extended Bump Stops
• Gear Box & Drive Line Modifications
• Steering Arms
• Swaybar Modification
4WD SUSPENISON STORE do not accept any responsibility for injury caused
to person or property through the use of the products listed on this page.